Plate Type Evaporator J150

Brief Information

Advantages of plate type evaporators:
1. High efficiency.
2. Small floor occupation, low building cost.
3. Short material holding time.
4. Low liquid holding volume.
5. Easy installation and maintenance.
6. Low investment.

Ordering Information

The heat exchange and equipment size is subjected by the size and number of plates, some of the classical and basic dimension information of the plates as follows:

Plate Material Characteristics
Material	Application
SS304	Drink water, None Corrosive Liquid, Oils, Fresh Steam etc.
SS316L	Well water, river water, closed circulating water and other water with complex components, Dilute sulfuric acid with temperature ≤ 50 ℃ and concentration ≤ 10% etc.
Titanium	Liquid that contains chlorine iron, Sea water etc.
Titanium Palladium Alloy	Higher temperature and corrosion resistance than titanium.
Nickel 20	It is mainly used for caustic solution (NaOH, Koh, etc.) with high concentration (50% ~ 70%) and high temperature (boiling point).
Hastelloy C-276	It has good corrosion resistance, almost not affected by Cl -, excellent corrosion resistance to various concentrations of sulfuric acid, and is one of the few materials that can be used in hot concentrated sulfuric acid, widely used in organic acids (such as formic acid, acetic acid), high temperature HF acid and a certain concentration of hydrochloric acid (< 40%), phosphoric acid (< 50%); chloride, fluoride.

Gasket Material Charactristics
Material	Working Temperature	Working Enviroment
NBR	-25~120℃	Alkane, olefin and other non-polar media, all kinds of mineral oil, animal and vegetable oil, hot water, salt water, etc。
EPDM	-50~170℃	Superheated water, steam, atmospheric ozone, non petroleum based lubricating oil, weak acid, weak base, ketone alcohol, etc
HNBR	-25~150℃	Crude oil, sulfur-containing oil and organic sulfur compounds, some heat transfer oil, new refrigerant 134a, etc
Viton	-25~150℃	Nonpolar mineral oil, high temperature water vapor, sulfuric acid, chlorine water, phosphate with concentration above 98%

Production Process

frame plate cutting — 1. Frame Plate Cutting

frame plate milling — 2. Frame Plate Machining

plate sheet cutting — 9. Plate Sheet Cutting

plate hole pressing — 11. Plate Hole Impacting

surface treatment — 16. Surface Treatment

Other Models List

M3, M6B, M6M, TL6B, TS6, M1OB, M10M, TL10B, TL10P, M15B, M15M, T20M, T20B, T20P, TS20, AK20, MX25B, M30, P16, P26, P36, TL35B, CLIP6, CLIP8, CLIP10, CLIP15, M6MW, M10BW, MK15BW, M20BW ,MA30S, MA30W, AX30B, MA30, TL15B, T2B, T5B, T5M, EC350, EC500, EC650, EC700, AC400, AC600, AC800

H12, H17, N35, N40, N50, SR14GD, R8GI, TR9-III, TR9-II, TR9-I, TR9, Q030E, Q030, Q055, Q080, A055, A085, J092, J107, J185, A145, M107, M092, M060, R14, R5

GCOO8, GL13, GX18, GC16, GC26, GX26, GX42, GX51, GC51, GC60, GX6O, GX100, GX140, GX64, GX91, GX85, GX145

VT04, VT10, VT20, VT40, VT40M, NT50M, NT50X,VT405, VT80, VT80M, VT8OP, NT100T, NT100M, NT100X, NT150L, NT150S, NT250S, NT250M, NT250L, NT350S, NT350M, VT2508, A184, N40, A161, CT193

S4A, SBA, S7A, S14A, S9A, S19A, S31A, S17, S20A, S21A, S22, S37, S41, S42, S43, S65, S100, S47, S64, S81, S62, S110, SF160, SF123

V4, V8, V13, V20, V28, V45, V60, V100, V110, V130, V170, V280

FP04, FP05, FP08, FP09, FP10, FP16, FP22, FP14, FP20, FP31, FP40, FP50, FP71, FP205, FP41, FP60, FP112, FP130

Sigma13, Sigma26, Sigma36, Sigma56, Sigma66, Sigma156, Sigma55, SigmaM35, SigmaM25, SigmaM36, SigmaM106, SigmaM90