Advantages of plate type evaporators:
1. High efficiency.
2. Small floor occupation, low building cost.
3. Short material holding time.
4. Low liquid holding volume.
5. Easy installation and maintenance.
6. Low investment.
The heat exchange and equipment size is subjected by the size and number of plates, some of the classical and basic dimension information of the plates as follows:
Plate Material Characteristics
Drink water, None Corrosive Liquid, Oils, Fresh Steam etc.
Well water, river water, closed circulating water and other water with complex components, Dilute sulfuric acid with temperature ≤ 50 ℃ and concentration ≤ 10% etc.
Liquid that contains chlorine iron, Sea water etc.
Titanium Palladium Alloy
Higher temperature and corrosion resistance than titanium.
It is mainly used for caustic solution (NaOH, Koh, etc.) with high concentration (50% ~ 70%) and high temperature (boiling point).
It has good corrosion resistance, almost not affected by Cl -, excellent corrosion resistance to various concentrations of
sulfuric acid, and is one of the few materials that can be used in hot concentrated sulfuric acid, widely used in organic acids
(such as formic acid, acetic acid), high temperature HF acid and a certain concentration of hydrochloric acid (< 40%), phosphoric
acid (< 50%); chloride, fluoride.
Gasket Material Charactristics
Alkane, olefin and other non-polar media, all kinds of mineral oil, animal and vegetable oil, hot water, salt water, etc。
Superheated water, steam, atmospheric ozone, non petroleum based lubricating oil, weak acid, weak base, ketone alcohol, etc
Crude oil, sulfur-containing oil and organic sulfur compounds, some heat transfer oil, new refrigerant 134a, etc
Nonpolar mineral oil, high temperature water vapor, sulfuric acid, chlorine water, phosphate with concentration above 98%
Other Models List
M3, M6B, M6M, TL6B, TS6, M1OB, M10M, TL10B, TL10P, M15B, M15M, T20M, T20B, T20P, TS20, AK20, MX25B, M30, P16, P26, P36, TL35B, CLIP6, CLIP8, CLIP10, CLIP15, M6MW, M10BW, MK15BW, M20BW ,MA30S, MA30W, AX30B, MA30, TL15B, T2B, T5B, T5M, EC350, EC500, EC650, EC700, AC400, AC600, AC800
H12, H17, N35, N40, N50, SR14GD, R8GI, TR9-III, TR9-II, TR9-I, TR9, Q030E, Q030, Q055, Q080, A055, A085, J092, J107, J185, A145, M107, M092, M060, R14, R5
GCOO8, GL13, GX18, GC16, GC26, GX26, GX42, GX51, GC51, GC60, GX6O, GX100, GX140, GX64, GX91, GX85, GX145
VT04, VT10, VT20, VT40, VT40M, NT50M, NT50X,VT405, VT80, VT80M, VT8OP, NT100T, NT100M, NT100X, NT150L, NT150S, NT250S, NT250M, NT250L, NT350S, NT350M, VT2508, A184, N40, A161, CT193
S4A, SBA, S7A, S14A, S9A, S19A, S31A, S17, S20A, S21A, S22, S37, S41, S42, S43, S65, S100, S47, S64, S81, S62, S110, SF160, SF123
V4, V8, V13, V20, V28, V45, V60, V100, V110, V130, V170, V280
FP04, FP05, FP08, FP09, FP10, FP16, FP22, FP14, FP20, FP31, FP40, FP50, FP71, FP205, FP41, FP60, FP112, FP130
Sigma13, Sigma26, Sigma36, Sigma56, Sigma66, Sigma156, Sigma55, SigmaM35, SigmaM25, SigmaM36, SigmaM106, SigmaM90
- Full Welded Heat Exchangers
Fully Welded Plate Type Heat Exchanger （Compabloc）
- Plates & Gaskets
Heat Exchanger Plate S350
- Multi Stage Plate Heat Exchangers
Gasket Type Plate Heat Exchanger Multi Stage
- Plates & Gaskets
Heat Exchanger Plate M3-H