Heat Exchanger Plate M3-H

Brief Information

Plate heat exchanger is an ideal equipment for liquid-liquid and liquid-steam heat exchange. It has the characteristics of high thermal efficiency, small heat loss, compact and light structure, small floor area, convenient installation and cleaning, wide application and long service life. Under the same pressure loss, the heat transfer coefficient is 3-5 times higher than that of the tubular heat exchanger, the floor area is one third of that of the tubular heat exchanger, and the heat recovery rate can be as high as 90%. Plate heat exchanger is widely used in metallurgy, petroleum, chemical industry, food, pharmaceutical, shipping, textile, papermaking and other industries. It is an excellent equipment for heating, cooling, heat recovery and rapid sterilization.

The whole machine is equipped with two kinds of common structure (not often used for dismantling and washing conditions) and suspension structure (used for working conditions with frequent dismantling and washing). The common structure is composed of herringbone corrugated plate, sealing gasket, pressing plate, upper and lower positioning bolts, compression bolts and other main parts. The suspension structure is composed of herringbone corrugated plate, sealing gasket, fixed pressing plate, intermediate plate, movable pressing plate, bracket, upper and lower positioning beam, compression bolt and other main parts.

Due to the special function of the corrugated surface of plate heat exchanger, the fluid flows along the narrow and curved channel, and the direction of its velocity constantly changes. As a result, the fluid stirs up strong end movement at a small flow rate (RC = 200), thus accelerating the destruction of the fluid boundary layer, strengthening the heat transfer process, effectively improving the heat transfer capacity, and making it have compact structure and gold It is characterized by low consumption, large operation flexibility, small heat loss, convenient installation, inspection and cleaning, strong corrosion resistance and long service life. The process of heat exchanger is composed of many plates assembled according to a certain process and the technical requirements of the demander. During assembly, plate A and plate B are arranged alternately, and mesh channels are formed between the plates. Four corner hole shaped distribution pipes and converging pipes are formed between the plates. The sealing gasket seals the hot and cold medium in the heat exchanger, and reasonably separates the hot and cold media without mixing. In the channel, the hot and cold fluids flow alternately, and the liquid can flow forward. In the process of flow, the hot and cold fluids exchange heat through the plate wall. There are many process combinations of plate heat exchanger, which are realized by different reversing plates and different assemblies. The flow combination forms can be divided into single process, multi process, vapor-liquid exchange process and mixed process. The process combination of heat exchanger should be selected according to the process conditions.

Ordering Information

The heat exchange and equipment size is subjected by the size and number of plates, some of the classical and basic dimension information of the plates as follows:

m10m plate size

photobank 7m9o8jo

photobank 14

l400600800 detail

Plate Material Characteristics
Material
Application
SS304
Drink water, None Corrosive Liquid, Oils, Fresh Steam etc.
SS316L
Well water, river water, closed circulating water and other water with complex components, Dilute sulfuric acid with temperature ≤ 50 ℃ and concentration ≤ 10% etc.
Titanium
Liquid that contains chlorine iron, Sea water etc.
Titanium Palladium Alloy
Higher temperature and corrosion resistance than titanium.
Nickel 20
It is mainly used for caustic solution (NaOH, Koh, etc.) with high concentration (50% ~ 70%) and high temperature (boiling point).
Hastelloy C-276
It has good corrosion resistance, almost not affected by Cl -, excellent corrosion resistance to various concentrations of
sulfuric acid, and is one of the few materials that can be used in hot concentrated sulfuric acid, widely used in organic acids
(such as formic acid, acetic acid), high temperature HF acid and a certain concentration of hydrochloric acid (< 40%), phosphoric
acid (< 50%); chloride, fluoride.

 

Gasket Material Charactristics
Material
Working Temperature
Working Enviroment
NBR
-25~120℃
Alkane, olefin and other non-polar media, all kinds of mineral oil, animal and vegetable oil, hot water, salt water, etc。
EPDM
-50~170℃
Superheated water, steam, atmospheric ozone, non petroleum based lubricating oil, weak acid, weak base, ketone alcohol, etc
HNBR
-25~150℃
Crude oil, sulfur-containing oil and organic sulfur compounds, some heat transfer oil, new refrigerant 134a, etc
Viton
-25~150℃
Nonpolar mineral oil, high temperature water vapor, sulfuric acid, chlorine water, phosphate with concentration above 98%

 

Production Process

Other Models List

M3, M6B, M6M, TL6B, TS6, M1OB, M10M, TL10B, TL10P, M15B, M15M, T20M, T20B, T20P, TS20, AK20, MX25B, M30, P16, P26, P36, TL35B, CLIP6, CLIP8, CLIP10, CLIP15, M6MW, M10BW, MK15BW, M20BW ,MA30S, MA30W, AX30B, MA30, TL15B, T2B, T5B, T5M, EC350, EC500, EC650, EC700, AC400, AC600, AC800

H12, H17, N35, N40, N50, SR14GD, R8GI, TR9-III, TR9-II, TR9-I, TR9, Q030E, Q030, Q055, Q080, A055, A085, J092, J107, J185, A145, M107, M092, M060, R14, R5

GCOO8, GL13, GX18, GC16, GC26, GX26, GX42, GX51, GC51, GC60, GX6O, GX100, GX140, GX64, GX91, GX85, GX145

VT04, VT10, VT20, VT40, VT40M, NT50M, NT50X,VT405, VT80, VT80M, VT8OP, NT100T, NT100M, NT100X, NT150L, NT150S, NT250S, NT250M, NT250L, NT350S, NT350M, VT2508, A184, N40, A161, CT193

S4A, SBA, S7A, S14A, S9A, S19A, S31A, S17, S20A, S21A, S22, S37, S41, S42, S43, S65, S100, S47, S64, S81, S62, S110, SF160, SF123

V4, V8, V13, V20, V28, V45, V60, V100, V110, V130, V170, V280

FP04, FP05, FP08, FP09, FP10, FP16, FP22, FP14, FP20, FP31, FP40, FP50, FP71, FP205, FP41, FP60, FP112, FP130

Sigma13, Sigma26, Sigma36, Sigma56, Sigma66, Sigma156, Sigma55, SigmaM35, SigmaM25, SigmaM36, SigmaM106, SigmaM90

Related Products

Request

What is 7+4?