Plate heat exchangers need to be cleaned after a period of time due to scaling, clogging, etc. Although removable plate heat exchangers can be completely disassembled to achieve full cleaning, many times workers will not operate correctly and the cleaning process will cause some damage to the plates and gaskets, while the process of re-installation cannot return the heat exchanger to its original state, which may result in the plates being pressed to a size too small, damaging the plates and gaskets or too large a compression size that is not compressed, leading to leaks and other problems. At the same time, the plate heat exchanger will slowly expand during multiple disassemblies, making it unusable and reducing the gasket life.
Mobile CIP cleaning machine is suitable for material pipeline and container equipment in situ cleaning in dairy, brewery, pharmaceutical, cannery, condiment factory and other general food factories; this equipment uses centrifugal pump to convey cleaning liquid in material pipeline and equipment container for forced circulation to achieve clean purpose, therefore, no need to disassemble pipeline and equipment, which can improve the utilization rate of equipment and reduce the labor intensity of workers.
The cleaning machine is mainly composed of acid washing tank, alkali washing tank, clear water tank, water pump, heater, control system, etc. Different cleaning liquids can be selected for different materials, the cleaning liquid is heated by the heater, and then, under the action of centrifugal pump, it is punched into the plate heat exchanger which needs to be cleaned, and the high temperature cleaning liquid flows between the plates at high speed to dissolve the dirt and make it fall off, and then return to the cleaning tank for recycling. Above, if the scaling is serious, you can extend the cleaning time. This system has excellent cleaning effect on single plate exchange, evaporator system, material storage tank, pipeline, etc.
